The top 3 finishers in the Wisconsin Skeeter Association belatedly held their 2020 spring awards banquet this week at the KW Skeeter Shop. Ken Whitehorse won the Bottle Trophy, Tom Hyslop was second, and Paul Krueger third. They also took the opportunity make a final check of the rear-seat Skeeter which is heading west tomorrow with Ed Newcomb.
Say farewell to the A-Class Skeeter rear-seater era in the Four Lakes Ice Yacht Club. Ken Whitehorse’s WARRIOR was the last rear-seater to sail competitively in our 4LIYC races, International Skeeter Association races, and Northwest regatta races. The above photo of Ken hiking on Geneva Lake appeared in the Janesville Gazette several years ago. Ken recalled that day of scrub racing. Skeeter Ice Boat Club’s Buddy Melges was the judge/flagman on a mushy, slushy track. Ken remembers that the boat “was a real mudder that day, WARRIOR came up and out of the slush to win 4 races!” Ken’s looking for a good home for the boat and listed it for sale on the Buy & Sell page.
More on the boat: Bill Dale gave Ken a super wide mast-pole 14″ from top to bottom and also gave him a super-full 2″ draft sail. (The kind of sail Dave Clapp and Tom Nichols used to use on the Navasink River.)
Paul Krueger developed the rear-seat Skeeter back in the 1970s. Here’s an excerpt about rear-seat Skeeters from the 4LIYC History page.
The Appearance of the Rear Seater Skeeter
By Greg Whitehorse
In 1975, Madison skipper Paul Krueger was involved in a serious iceboating accident while competing in a Northwestern Regatta on Lake Winnebago. Krueger thought that part of the cause of the accident was the limited vision one had while sitting under the boom when sailing a Skeeter. With that in mind he designed and built the first rear-seater Skeeter for the 1976 sailing season.
Not only did the skipper not have to duck under the boom on each jibe or tack; he also enjoyed a much larger field of vision. The new design also allowed the gap between the boom and deck to be closed. In other words, when fully trimmed, the boom was now pulled down to meet the deck This greatly enhanced the performance of the already potent Class E Skeeter iceboat.
Paul Krueger’s A Class Skeeters spanning 40+ years: From left, Ramblin’ c. 1970, Ramblin’ c.1980, Ramblin’ 2015 ISA
Krueger’s new design dominated the competition for the next few years. He won win two ISA World Championships, in 1976 and 1979, along with a Northwestern Regatta title in 1979. The dominance of Krueger’s Rambl’n forced others to change to a rear seat design in order to keep up. With Krueger’s and Bill Mattison’s help, most of the 4LIYC Skeeter fleet was converted to the new design.
Outside the 4LIYC area some Skeeter sailors were not real happy about having to make yet another change in their yachts, even though no parts off the old boats were made obsolete with Krueger’s new design. The hull was fairly easily converted to rear seat dimensions, and the existing boom only needed to be made a little wider.
Soon all serious contenders in the Skeeter fleet were sailing rear seaters. In 1977 Ken Whitehorse sailed a Krueger reconfigured Skeeter to a Northwestern Championship, becoming yet another 4LIYC member to win a major regatta.
Paul Krueger and Ken with the boat on the trailer a few weeks ago. Paul is the builder of this boat.
Activities at area iceboat shops are in full swing as everyone prepares for the upcoming season. Over at the Krueger-Whitehorse Skeeter shop, PK vacuum-bagged his Class A Skeeter plank last week. In this short video, they are removing the burlap skin. The plank will be seeing some red soon.
Paul trimming a little carbon off of his Class A Skeeter plank.
Paul Krueger and Ken Whitehorse were back in the Skeeter Shop on Saturday preparing for the upcoming season. Paul focused on the runner plank while Ken welded up a portable fire pit. Is there room in the trailer for a portable fire-pit? A fire on the ice at the end of a sailing day could be the answer to the social-time dilemma that COVID has presented.
Ken utilizing his blacksmith skills. Wait, what’s that in the background, a Skeeter bus?
Previous: Classic Video: Pewaukee Ice Yacht Club
Here’s another Bill & Mauretta Mattison home movie proving the point about mast gluing parties referenced in the previous post. This glue party at the Mattison shop on Williamson Street in Madison, WI took place sometime around 1982. The mast is for an A Class Stern Steerer, possibly the MARY B. Clampers and gluers that day were Billy Mattison, Jack Ripp, Jerry Simon, Greg Simon, Lon Schoor, Donna Schoor, Jim Henkel, Don Sanford, Paul Krueger, Ken Whitehorse, Bill Hanson, Bill Mattison, and Ken Schmidt.
