There’s a lot of laps around the marks in this group! From left: Skeeter sailors Bill Dale, Tom Hyslop, and Paul Krueger, Renegader Jack Ripp, Skeeter sailor Bill Mattison and Ken Whitehorse. Bottom row, Skeeter sailor Dave Nelson and Renegader Jerry Simon
How fitting that a spring snow storm arrived the same day as our April 27th Four Lakes Ice Yacht Club annual awards dinner, a reminder of the cold weather necessary for ice sailing. Highlights include 4LIYC Commodore Don Anderson’s induction into the 4LIYC Hall of Fame, aka the Honor Roll; an all star line up of seasoned veterans (see photo above) and an acknowledgement of appreciation for Nite class outgoing Commodore, Don Sanford who wore the hat for ten years. All credit for the event goes to Trophy and Banquet Chair, Jori Lenon for bringing everyone together. Thanks to Greg McCormick and John Hayashi for the photos.
Vice Commodore Tim McCormick and Commodore Don Anderson.
Renegade class sailors
Outgoing Nite Commodore Don Sanford, Renegaders Jeff Russell and Jerry Simon.
Dave Nelson must have been telling Ken Whitehorse a good story!
Commodore Don Anderson with the 4LIYC Honor Roll placque
Daniel Hearn and Maureen Bohleber take Nite honors.
Above: Pat Heppert and John Dennis with the first place Wisconsin Skeeter Association Paul Krueger Trophy.
The 2019 Wisconsin Skeeter Association (WSA) trophies winners have been selected based upon regatta results. After consultation with WSA officials, the United States Geological Survey, and the final say of WSA Director of Competition, Greg Whitehorse, the regatta starting and finish lines were determined to be on the Wisconsin side – even though the ISA and Northwest regattas were launched out of the Minnesota side of Lake Pepin. These trophies will be awarded at the 4LIYC Spring Banquet on April 27th at Springers. You still have until Sunday night to make your reservation. Banquet details here.
B Skeeter Champion Steve Schalk 2nd Northwest Regatta 2nd 2019 ISA Regatta Tied 2018 ISA Regatta Also in acknowledgement of his work as ISA & NIYA Secretary and his support for the B Skeeter fleet.
Sunday Series 1st Place John Dennis The Tom Hyslop Trophy aka “Yellow Boat on a Swivel”
Bottle Race Pat Heppert Many thanks to Pat for helping PK set up and tear down, and most importantly, ensuring all the pins and bolts are stored in their proper places.
2nd Place Paul Krueger Started all races and honoring an incredible come back after a year of recovery.
The SSS “Pop-Up” Carbon Station Note: Newly installed hazmat barrier protecting laundry room. You’re welcome, honey.
News from the Spaight Street Syndicate
Look what appeared in the inbox this morning! An update from our other area Skeeter builder, Daniel Hearn, mentioned in yesterday’s post.
At the Northwest Regatta in January, I had the chance to sail the C-Skeeter “Drifter.” I’ve always admired the boat from afar, but resisted the temptation to look into it further. But then this very nice man named Pat (might be an alias) saw me checking her out. He must have sensed an easy target. I didn’t see his white van or puppy, but I’m sure he has both. And he smiled so warmly as he shared his chocolate. Next thing I know I had downloaded the plans and was purchasing Baltic Birch. If Pat is married, I hope his wife is not high maintenance, because Pat is now receiving more correspondence than Dear Abby. No doubt he’s already regretted giving me a taste, but it’s too late to turn back now.
First thing I had to do was extend my DN building table. Check. Now I’m at 20 feet and level. With one foot to spare on each end. Good thing I’m kinda scrawny. And good thing that window is where it is, otherwise this thing would be a permanent fixture in my basement. I measured twice. I’ll get her out. I think? Jack Ripp used to talk about “building in a closet.” Now I appreciate that.
Edge-gluing outside plank lamination.
The next thing I did was embrace my deficiencies. I know next to nothing about Skeeters, so I consulted the brain trust who knows everything. Pat Heppert and Bill Buchholz have openly shared their experiences building Pat’s design. And the A-Skeeter guys have shared lots of info with a guy who’s been playing around with those “toy boats” for some time. Many thanks to Jay Yaeso, Kenny Whitehorse, Paul Krueger, Bob Kau, Tom Nichols, Henry Bossett, Steve Orlebeke, Jim Nordhaus, Jerry Simon and others. With their help and tips, I might actually be able to do this. And one more thank you to my brother, Brian, who is providing a second set of hands and valuable structural input pulled from his experience as an architect.
Rough springboard, boom and plank middle “ladder” lamination. Ladder yet to be tapered with my planer. Maybe next weekend. Don’t tell my neighbors! Note: Hull “escape hatch” window above.
Yesterday, I also had the pleasure of visiting with Bill Mattison, the man who probably knows more about Skeeters than anyone on the planet. Bill is on the mend from a little setback. When I showed up at his room, I met Bill Jr. and granddaughter, Abby, who live in Racine. Told them I love going there for regattas. When I mentioned Cupie Burgers, Well Brothers Pizza and Cliff’s for breakfast, I think they thought I was legit. Well, when I started talking iceboats with Bill, he lit up light the North Beach Harbor lighthouse. I showed him pictures and videos of what’s going on in the shops and Abby giggled when he struggled with the technology. Just listening to Bill exposed how little I know about the Formula One of iceboats. But I enjoyed every second. Bill Jr. said he hadn’t seen his dad so engaged for a long time. That was nice to hear! And what a treasure we have in Madison with so many elder statesmen of ice sailing!
So much for my rambling. Here’s what I’ve scratched off my list so far. With my limited building space, I started on the small stuff first, and when the weather is reasonably warm on weekends, I jump outside to disturb my neighbors making sawdust in the driveway. (Had a visit with a Madison police officer yesterday. Nice guy!)
Mentioned to my wife in passing that I “might” build another boat. “Really,” she said, as she smiled lovingly. (That may have been a question, but I’m going to punctuate with a period. She’s the best!)
Bulkheads cut out. (Twice, actually. Decided it wasn’t a good idea to try to make her shorter and skinnier). We’re not into “body shaming” on the near east side. Pretty much anything else goes, however.
Four bulkheads surrounding cockpit covered with two layers of carbon. (Learned how to do it poorly on the first one. Will cover again to hide my ineptitude).
Springboard formed, shaped and covered top and bottom with carbon.
Boom covered with carbon.
Middle “ladder” lamination of plank complete.
Stringers and spines cut to size.
Canopy located and ordered.
Trailer designed and ordered.
Sideboards and other plank laminations planed to size.
Long list of potential names generated. (Class rule that Skeeters have a name on the side).
Next up—edge-gluing boards to get required height or width for sideboards and outside plank laminations. Then, gluing up the plank.
Ken adjusting the height of the winch in his latest Skeeter acquisition.
An important cog.
I simply walked over next door to the Krueger/Whitehorse Skeeter Iceboat Shop to ask if they’d be ready to sail next weekend if Kegonsa came in and was immediately tasked with helping Ken make some adjustments on the blue Class A Skeeter. Ken caught me up on the latest news from one of the busiest Skeeter shops in town. (Yes, there’s another which we hope will start sharing photos of their build. Hint. Hint.) The big news of the weekend was the delivery of massive Skeeter Class A size runner sharpener made by Bob Rast.
Paul Krueger and Daniel Hearn ooh and ahh over the new runner sharpener built specifically for Skeeters.
FAKE NEWS CORRECTION Previously, it had been reported on this website that Steve Orlebeke designed the Skeeter cascade block system. Sources tell me that it was actually Jay Yaeso who figured out and installed this sheeting system 2 years ago.
Oh, and to answer my original question if the Skeeters will be ready for next weekend, the answer is yes, PK’s boat is on the trailer ready to go and Ken will have the blue Skeeter ready as well.
Ken Whitehorse and Jim Gluek crunching the numbers of Class A Skeeter sails down at the Krueger/Whitehorse Skeeter Speed Shop.
4LIYC Skeeter sailors Ken Whitehorse, Paul Krueger, and Jim Gluek gathered at the Krueger/Whitehorse Skeeter Shop on Saturday. They brought and measured 8 sails and learned that all were less than 74 square feet. They also spent the day configuring a new Harken cascade pulley system designed by Steve Orlebeke for Ken’s new blue-soon-to-be-red Skeeter. Steve’s design is attracting a lot of interest including some from Daniel Hearn who stopped by to see it being installed. Ken reports that Tom Hyslop will also be changing his pulley system over Steve’s design which uses a combination of Harken block 3238, 3216, and 3215. Iceboat work never stops!
Jim Gluek took some of the photos and sent along this note:
Great day with two legends in our sport. PK and Kenny. Stories of the Skeeter side-car so Kenny could take a crew; two sets of chocks on the plank so you could move the runner in board. One of the most awesome thing about ice boating are the people and the stories over the years.
Paul Krueger and Jim Gluek configure the new Steve Orlebeke designed cascade pulley system.
