As reported yesterday, squalls made for some wild rides during the Racine Yacht Club’s HOOK Race downwind from Racine to Door County on the Wisconsin side of Lake Michigan. Apparently there were 5 boats that lost rigs, including Jay Yaeso’s SHAZAM, proving again that sailing on Lake Michigan can be more challenging than ocean racing in big “sleds” – something 4LIYC Commodore Don Anderson who has sailed a few Transpacs related to me yesterday. SHAZAM’S mast “oil-canned” (compressed) Saturday afternoon during a 50 mph squall with 8 – 10′ waves. Thankfully, all crew were OK and they were able to pull into Sheboygan after 4 hours on the motor where they met up with Steve Orelebeke who had been sailing on PEERLESS. Steve and crew were forced to pull into Sheboygan because the waves pushed too much water into the hatch. I believe that race tracking did show that Fred Stritt and HASTEN made it to the end of the race. There were quite a few DNFs, possibly 18.
However, there was one group of ice sailors who made HOOK history and “absolutely shattered a Hook race record” by 3 hours, Rick Hennig (owner of DEUCE) and the crew of THUNDERSTRUCK. From crew member Eric Tobias’ Facebook feed:
20 hours, 20 kts of boatspeed, 47 knot peak wind speed, hurricane rain, lightning sky, one exploded spinnaker, one exploded jib, several wipe outs, one absolutely shattered Hook race record, a passage through Death’s Door and one incredibly wild ride. We made it to the finish safe with minimal damage and injuries. Thankfully we didn’t find a new meaning for our boat name (we didn’t get struck by lightning). Go Thunderstruck.
Expect to hear some stories about the HOOK race of 2020 during those times when we are standing on the ice waiting for wind.
Wonder many iceboats these guys own? Dave Elsmo from THUNDERSTRUCK, Erik Sawyer SHAZAM, Steve Orlebeke PEERLESS, Don Anderson SHAZAM, Jay Yaeso, SHAZAM, and George Gerhardt SHAZAM at the Sheboygan Yacht Club.
From left, Steve Orlebeke, Jay Yaeso, Mike “Wally” Waldo , George Gerhardt, Don Anderson, Erik Sawyer, and behind Erik, Andy Gratton. Behind Wally, Paul Scneeberger and Tony Abts, both from Green Bay.
UPDATE JULY 19: Andy Gratton checked in with the rest of the crew names that I missed. He also wrote with news that the rig collapsed yesterday during a squall which ended their race. He adds, “All are safe, no holes in the boat. We decided we did not want to do that again.”
Several area ice sailors are gathered this morning at the Racine Yacht Club for the 37th annual long distance Lake Michigan HOOK race from Racine to Death’s Door in Door County, WI. Pretty much every class of ice sailing is represented in this race including the Skeeters, DNs, Renegades, and Stern Steerers. 4LIYC Commodore Don Anderson, Renegader George Gerhardt, Stern-Steerer guys Andy Gratton, Mike “Wally” Waldo. and Erik Sawyer will be sailing with Jay Yaeso on SHAZAM (PHRF2). Skeeter and DN sailor Steve Orlebeke is on PEERLESS (PHRF2). Rick Hennig, who owns the biggest iceboat in the world, DEUCE, is sailing his new Farr 60 THUNDERSTRUCK (PHRF1). Stern-Steerer sailor Fred Stritt is sailing HASTEN (PHRF 4).
Results
Competitors and Race Committee members are slowly making their way back to reality (home) after spending an amazing week on a sheet of Montana ice. Several car loads of sailors went full tourist and headed over to Mount Rushmore, the Crazy Horse statue, and Devil’s Tower before turning east. Above is the best drone video ever made of iceboat racing by Glasgow, MT photographer Sean Heavey. Be sure to check out his photo gallery as well here. The drone video focuses on Detroit’s Ron Sherry US44 (2nd place in the regatta) and Pewaukee and 4LIYC Skeeter sailor Steve Orlebeke US4926 (4th place in the regatta) as they battle for first place in the last race.
Day 4 of the IDNIYA 2020 North America Ice Yacht Championship on Fort Peck Lake …
Today was epic!! The Montana wind we all know and at times hate came ready to play. While I can write about the day and probably describe it pretty good I’m a visual person so I think maybe a visual will do it more justice.
But first let me set the scene… This is a drone clip of the last Gold fleet race of the day before the regatta was called due to excessive wind speed. The wind had ratchet up to a sustained 18 mph range with gusts to 22+. These boats go 4 to 5 time the wind speed so let’s just say they were scooting along and it’s really hard for a drone to keep up. But I was starting to get the hang of how to fly with them and keep the leaders in sight. The race consists of three laps and this clip picks up the leaders about half way through the second lap. Nobody is going down with out a fight… Does the first place boat hang on?
As a side note… a big thank you to all the racers and race officials for coming all this way to the middle of nowhere. What a great event you put on and I hope your return trips home are made safely. Also thank you to everyone in NE Montana for your hospitality and support. You made everyone feel at home and part of the middle of nowhere family…
The SSS “Pop-Up” Carbon Station Note: Newly installed hazmat barrier protecting laundry room. You’re welcome, honey.
News from the Spaight Street Syndicate
Look what appeared in the inbox this morning! An update from our other area Skeeter builder, Daniel Hearn, mentioned in yesterday’s post.
At the Northwest Regatta in January, I had the chance to sail the C-Skeeter “Drifter.” I’ve always admired the boat from afar, but resisted the temptation to look into it further. But then this very nice man named Pat (might be an alias) saw me checking her out. He must have sensed an easy target. I didn’t see his white van or puppy, but I’m sure he has both. And he smiled so warmly as he shared his chocolate. Next thing I know I had downloaded the plans and was purchasing Baltic Birch. If Pat is married, I hope his wife is not high maintenance, because Pat is now receiving more correspondence than Dear Abby. No doubt he’s already regretted giving me a taste, but it’s too late to turn back now.
First thing I had to do was extend my DN building table. Check. Now I’m at 20 feet and level. With one foot to spare on each end. Good thing I’m kinda scrawny. And good thing that window is where it is, otherwise this thing would be a permanent fixture in my basement. I measured twice. I’ll get her out. I think? Jack Ripp used to talk about “building in a closet.” Now I appreciate that.
Edge-gluing outside plank lamination.
The next thing I did was embrace my deficiencies. I know next to nothing about Skeeters, so I consulted the brain trust who knows everything. Pat Heppert and Bill Buchholz have openly shared their experiences building Pat’s design. And the A-Skeeter guys have shared lots of info with a guy who’s been playing around with those “toy boats” for some time. Many thanks to Jay Yaeso, Kenny Whitehorse, Paul Krueger, Bob Kau, Tom Nichols, Henry Bossett, Steve Orlebeke, Jim Nordhaus, Jerry Simon and others. With their help and tips, I might actually be able to do this. And one more thank you to my brother, Brian, who is providing a second set of hands and valuable structural input pulled from his experience as an architect.
Rough springboard, boom and plank middle “ladder” lamination. Ladder yet to be tapered with my planer. Maybe next weekend. Don’t tell my neighbors! Note: Hull “escape hatch” window above.
Yesterday, I also had the pleasure of visiting with Bill Mattison, the man who probably knows more about Skeeters than anyone on the planet. Bill is on the mend from a little setback. When I showed up at his room, I met Bill Jr. and granddaughter, Abby, who live in Racine. Told them I love going there for regattas. When I mentioned Cupie Burgers, Well Brothers Pizza and Cliff’s for breakfast, I think they thought I was legit. Well, when I started talking iceboats with Bill, he lit up light the North Beach Harbor lighthouse. I showed him pictures and videos of what’s going on in the shops and Abby giggled when he struggled with the technology. Just listening to Bill exposed how little I know about the Formula One of iceboats. But I enjoyed every second. Bill Jr. said he hadn’t seen his dad so engaged for a long time. That was nice to hear! And what a treasure we have in Madison with so many elder statesmen of ice sailing!
So much for my rambling. Here’s what I’ve scratched off my list so far. With my limited building space, I started on the small stuff first, and when the weather is reasonably warm on weekends, I jump outside to disturb my neighbors making sawdust in the driveway. (Had a visit with a Madison police officer yesterday. Nice guy!)
Mentioned to my wife in passing that I “might” build another boat. “Really,” she said, as she smiled lovingly. (That may have been a question, but I’m going to punctuate with a period. She’s the best!)
Bulkheads cut out. (Twice, actually. Decided it wasn’t a good idea to try to make her shorter and skinnier). We’re not into “body shaming” on the near east side. Pretty much anything else goes, however.
Four bulkheads surrounding cockpit covered with two layers of carbon. (Learned how to do it poorly on the first one. Will cover again to hide my ineptitude).
Springboard formed, shaped and covered top and bottom with carbon.
Boom covered with carbon.
Middle “ladder” lamination of plank complete.
Stringers and spines cut to size.
Canopy located and ordered.
Trailer designed and ordered.
Sideboards and other plank laminations planed to size.
Long list of potential names generated. (Class rule that Skeeters have a name on the side).
Next up—edge-gluing boards to get required height or width for sideboards and outside plank laminations. Then, gluing up the plank.
